Identification Labels For The Cfw-11 - WEG CFW-11 Series User Manual

2.4 IDENTIFICATION LABELS FOR THE CFW-11

There are two nameplates on the CFW-11: one complete nameplate is affixed to the side of the inverter and
a simplified one is located under the keypad. The nameplate under the keypad allows the identification of the
most important characteristics of the inverter even if they are mounted side-by-side.
CFW-11 model
WEG part number
Inverter net weight
Rated input data (voltage, number of phases,
rated currents for operation with ND and HD
overload cycles, frequency)
Current specifications for operation with
normal overload cycle (ND)
Current specifications for operation with
heavy overload cycle (HD)
CFW-11 model
WEG part number
Nameplate affixed to the side of the
1
heatsink
Nameplate under the keypad
2
(a) Nameplate affixed to the side of the inverter
BRCFW110044T6OYZ
11799018 48 H
SERIAL#: 1013933619
(b) Nameplate located under the keypad
Figure 2.12 - (a) and (b) - Nameplates
2
Figure 2.13 - Location of the nameplates
General Instructions
Manufacturing date (48 corresponds
to week and H to year)
Serial number
Maximum surrounding air temperature
Rated output data (voltage, number of phases,
rated currents for operation with ND and HD
overload cycles, over load currents for 1 min
and 3 s, frequency range)
Manufacturing date
(48 corresponds to
week and H to year)
Serial number
1
CFW-11 | 2-17
2