Identification Labels - WEG CFW-11 User Manual

General Information
1 USB connector
USB LED
2
2
Off: without USB connection
On/blinking: USB communication active
Status LED
3
Green: normal operation without fault or alarm
Yellow: in the alarm condition
Blinking red: in the fault condition
2.4 CFW-11 IDENTIFICATION LABELS
There are two identification labels, one complete nameplate is affixed at the side of the inverter and a simplified
label is located under the keypad. The label under the keypad allows the identification of the most important
characteristics of the inverter even if they are mounted side-by-side.
Rated input data (voltage, number of
power phases, rated currents for use with
Normal Duty (ND) and Heavy Duty (HD)
Current specifications for use with the
Normal Duty (ND) cycle
Current specifications for use with the
2-12 | CFW-11
Figure 2.6 - LEDs and USB connector
CFW-11 model
WEG part number
Inverter net weight
cycles, frequency)
Heavy Duty (HD) cycle
(a) Nameplate affixed at the side of the inverter
CFW-11 model EUCFW11DB70T4CYWZ
11695271
WEG part number
SERIAL#:
(b) Label located under the keypad
Figure 2.7 - (a) and (b) - Identification labels
3
2
Maximum ambient temperature surrounding the
inverter
Serial number
Manufacturing date (37 corresponds to the
week and I to the year)
Rated output data (voltage, number of power
phases, rated currents for use with Normal Duty
(ND) and Heavy Duty (HD) cycles, overload
currents for 1min and 3 s, and frequency range)
Manufacturing date
(37 corresponds to
11L
week and L to year)
1234567890
Serial number
1