Appendix C - Mounting Instructions - WEG MW500 User Manual

Appendix C
APPENDIX C – MOUNTING INSTRUCTIONS
Integrate Mounting Instructions
Step
1
Install the motor wires using the connector
„
provided with the motor.
2
Place and fasten the motor seal on the
„
motor with 4 screws.
46 | MW500
Action
Figure C.1: Integrate mounting instructions
Step
3
Place and fasten the drive onto the
„
intermediate adaptation box with 4 drive
screws.
4
Connect the motor wire to the push-in motor
„
terminal block (X2).
Action