Identification Labels For The Cfw-11 - WEG CFW-11 User Manual

1
USB Connector
2
USB LED
Off: No USB connection
On/Flashing: USB communication is active
3
STATUS LED
Green: Normal operation with no fault or alarm
Yellow: Alarm condition
Flashing red: Fault condition

2.4 IDENTIFICATION LABELS FOR THE CFW-11

There are two nameplates on the CFW-11: one complete nameplate is affixed to the side of the inverter and
a simplified one is located under the keypad. The nameplate under the keypad allows the identification of the
most important characteristics of the inverter even if they are mounted side-by-side.
CFW-11 model
WEG part number
Inverter net weight
Input rated data (voltage, number of phases,
rated currents for operation with ND and HD
overload cycles, and frequency)
Current specifications for operation with
normal overload cycle (ND)
Current specifications for operation with
heavy overload cycle (HD)
Available certifications
CFW-11 model
WEG part number
Figure 2.3 - LEDs and USB connector
(a) Nameplate affixed to the side of the inverter
CFW110211T4SZ
12345678
99/99/9999
SERIAL#: 1234567980
(b) Nameplate located under the keypad
Figure 2.4 (a) and (b) - Nameplates
General Instructions
Manufacturing date (day/month/year)
Serial number
Maximum surrounding air temperature
Software Version
Output rated data (voltage, number of phases,
rated currents for operation with ND and HD
overload cycles, over load currents for 1 min
and 3 s, and frequency range)
Manufacturing date (day/month/year)
Serial number
2
2-7