Receiving And Storage - WEG MW500 User Manual

2.5 RECEIVING AND STORAGE

The MW500 is supplied packed in a cardboard box. On this package, there is an
identification label which is the same as the one attached to the side of the drive.
Check if:
The identification of the MW500 matches the model purchased.
„
Any damages occurred during transportation.
„
Report any damage immediately to the carrier.
If the MW500 will not be installed soon, store it in a clean and dry location (temperature
between -25 °C and 60 °C (-13 °F and 140 °F)), with a cover to protect it against dust
accumulation and in consequence maintain the dissipation capacity of the drive.
ATTENTION!
When the drive is stored for a long period, it is necessary to perform the
capacitor reforming. Refer to the procedure recommended in
6.4 - Preventive Maintenance of this manual.
- English -
General Information
section
MW500 | 7