Hard Disk Drive (Hdd); Sd Cards - JVC SR-HD1500EU Instructions Manual

Getting Started

Hard Disk Drive (HDD)

Hard disk drive (HDD)
The HDD rotates at a high speed whenever the power is
turned "On".
Pay particular attention to the following precautions when
using this unit.
Do not subject it to vibration or strong impact
Subjecting this unit to excessive impact may result in loss of
recorded data and even damage of the HDD.
Do not remove the power plug when this unit is running
Shutting down the power when the HDD is running may
result in data loss and even damage of the HDD. Make sure
that the power plug is removed only after turning off the
power.
(Wait for the "GOODBYE" message on the display window
to disappear first)
8
Warning

SD Cards

Precautions for handling SD and SDHC
cards
Note:
The disc operation display icon appears blinking and
"READING" is displayed on the display window when the SD
card is being accessed (such as during dubbing, playback, or
formatting). When access to the SD card is in progress, do not
remove the card or the power plug. Doing so may cause the
SD card to become unusable.
If the SD card is not usable, reformat the card. If the problem
persists even after reformatting, use a new SD card.
Do not use or store the card at a place that is subject to static
or electrical noise.
Inserting the SD card incorrectly may cause this unit or the
card to malfunction.
Our company will not be liable for any damage or loss of the
stored data due to accidents. (Be sure to back up the data.)
Use the card according to the prescribed conditions. Do not
use it at the following locations.
Places that are exposed to direct sunlight
Places near heat-generating equipment
Inside a car that is under the sun with the windows tightly
shut
Places that are subject to high humidity and corrosion
Do not bend or drop the card, or subject it to strong impact
or vibration.
Do not expose the card to water.
Do not place near devices that emit strong magnetic or
radio waves.
Do not touch the metal part of the card.
Memo:
To dispose a card after erasing all data inside, it is
recommended that this be done using a commercially
available data deletion software, or by destroying the card
physically, such as with a hammer. Formatting or deletion of
data using this unit only changes the file administration
information, and does not erase the data completely.