Installation Settings - JVC VR-509E Instructions Manual

Installation and Preparation

Installation Settings

1. Press the [MENU] button.
CAMERA SETUP
RECORD SETUP
OPERATION MENU
LIVE PICTURE
Button operation explanation
SET UP
CURSOR
UPDATE/NEXT
BACK
• Open the menus in accordance with the instructions
provided in MENU Screen Operations (page 17) in the
sequence of [MENU] → [CAMERA SETUP].
• The [CAMERA SETUP-1] screen will be displayed.
* The settings cannot be amended during recording.
CAMERA SETUP-1
CAM 1
CAM 2
CAM 3
CAM 4
CAM 5
CAM 6
The current setting is changed when preserving it.
CAM 7
CONTINUE ABORT
CAM 8
CAM 9
PRIORITY
2. Select "CONTINUE" on the confirmation screen with
the use of the [ / ] keys, and then press the [SET]
button.
• The confirmation screen will close.
* Select "ABORT" and press the [SET] button to return to
the top menu.
CAMERA SETUP-1
3. Select your desired item with [ / ], and then press
[–/+] to change the value settings.
Settings
CAMERA1 to 9
CONNECT, DISCONNECT:
Set the camera input that is to be used for
recording at "CONNECT", and all other cameras
at "DISCONNECT".
PRIORITY
SMOOTH: Set and record with a total recorded frame count
of 100 images per second, and a picture size of
352 x 288 pixels.
HIGH-RESOLUTION:
Set and record with a total recorded frame count
of 50 images per second, and a picture size of
720 x 288 pixels.
20
FUNCTION : USER GUIDANCE
CONNECT
CONNECT
CONNECT
3.
CONNECT
CONNECT
CONNECT
Confirmation
CONNECT
CONNECT
screen
CONNECT
SMOOTH
2.
CAUTION
When the setting has been made for a specific number of
cameras, it is only possible to amend [CAMERA SETUP-1].
In order to amend the subsequent cameras, the [REC
PATTERN SET] data (the F.RATE, QLY, and M.DET
settings for NORMAL REC/ALARM REC) that use
[STANDARD] or [REC PATTERN 1 to 9] must be reset.
(See "Setting the REC PATTERN SET" on page 31)
4. Press the [SET] button.
• The [CAMERA SETUP-2] screen will be displayed.
CAMERA SETUP -2
DURATION
1 WEEK
AUDIO REC
REPEAT REC
CAMERA SETUP-2
5. Select your desired item with [ / ], and then press
[–/+] to change the value settings.
Settings
DURATION
1DAY, 3DAYS, 5DAYS, 1WEEK, 2WEEKS, 3WEEKS,
1MONTH, 2MONTH, 3MONTH:
Set the period for which the recorded images are to
be stored on the hard disk based on the preset
recorded image mode and the number of cameras
connected.
* This storage period only acts as a guidelines, as the actual
period of storing images may differ depending on
amendments to the frame rate, quality and other settings in
[CAMERA SETUP-3]. (Refer to the section on "Recording
Duration" on page 110 for further details on the storage
period for recorded images.)
AUDIO REC
ON, OFF: Set whether to record sound audio when in the
NORMAL REC and ALARM REC modes.
REPEAT REC
Set the action when the remaining capacity in the hard disk
becomes empty.
OFF: Stops recording.
ALARM LOCK: Continues recording over old recordings.
However, recordings made in the ALARM REC
mode will not be overwritten.
ALL: Continues recording over old recordings.
OFF 5.
OFF