Table of Contents
Advertisement
High-Speed Search
During playback, press 5 for forward high-speed
search, or 3 for reverse high-speed search.
Each press of the button increases the search speed for each
direction.
To resume normal playback, press 4.
OR
During playback, press and hold 6 for 2 or more
seconds for forward high-speed search, or press and hold
2 for 2 or more seconds for reverse high-speed search.
Releasing the button resumes normal playback.
Still Picture/Frame-By-Frame
Playback
1
Pause during playback.
Press 9.
2
Activate frame-by-frame playback.
Press 9.
Each press of 9 advances the still picture frame by frame.
OR
Press w e.
Each press of w e advances/reverses the still picture frame by
frame.
Frame-by-frame playback for reverse direction cannot be
performed with Video CD/SVCD discs.
To resume normal playback, press 4.
Slow Motion
While paused, press SLOW – or SLOW +.
Each press of SLOW – or SLOW + increases the slow motion
speed for each direction (from 1/16 to 1/2 times the normal
speed).
Slow motion for reverse direction cannot be performed with
Video CD/SVCD discs.
OR
Press 2 or 6 for 2 or more seconds.
Skip Search
During playback, press
Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
.
Resume Function
It is possible to memorize the position where you stop playback
and resume playback from that position.
Be sure to set "RESUME" to "ON" or "DISC RESUME".
(
pg. 100)
1
Memorize a resume point.
Press 8 during playback.
The unit enters Resume Stop mode and memorizes the
position where you have stopped playback as a resume point.
(The inside of the disc status indicator on the front display
panel blinks in the Resume Stop mode.)
The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected if
"RESUME" is set to "DISC RESUME". (
To clear the resume points:
(The inside of the disc status indicator stops blinking and
lights.)
When "RESUME" is set to "ON":
• Press 1 on the unit or DVD1 on the Remote to turn off
the unit.
• Press x to take out the disc.
• Press 8 in stop mode.
• Press TOP MENU to display the top menu, then start
playback by selecting an item, etc.
• Press MENU to display the disc menu, then start playback by
selecting an item, etc.
When "RESUME" is set to "DISC RESUME":
• Set "RESUME" to "OFF". (
• Press 8 in stop mode.
• Press TOP MENU to display the top menu, then start
playback by selecting an item, etc.
• Press MENU to display the disc menu, then start playback by
selecting an item, etc.
2
Resume playback.
Press 4 in stop mode. The unit starts playback from the
resume point.
NOTES:
"DISC RESUME" setting works on DVD VIDEO, VCD, SVCD
and already finalised DVD-R/DVD-RW (video mode) discs. For
other types of discs, the function under "ON" setting will be
applied even if "RESUME" is set to "DISC RESUME".
If you stop the playback of a disc for which an resume point
has already been memorized, the memory will be updated
with the new resume point.
After the unit has memorized the resume point for 30 discs,
remembering a new resume point will cause the unit to delete
the oldest memorized point. Stopping playback of a disc for
which a resume point is already stored may change the order
in which the points are stored. This may potentially change the
order in which points are deleted.
When the unit memorizes a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
This function may not work for some Video CD or SVCD.
When "RESUME" is changed to "ON" or "OFF", resume
points of the discs memorized with "RESUME" set to "DISC
RESUME" will be cleared.
Resume points are memorized for each side of a double-sided
disc.
37
EN
pg. 100)
pg. 100)
Advertisement
Table of Contents
