Table of Contents
Advertisement
At this point the left (or first 16 digit) portion of the master key has been entered successfully.
Master Key Installation
If you are entering a 32 bit key (TDES), the second
or "Right" half of the key is entered next.
This option will only appear when in TDES mode.
After entering the right portion of the key
successfully you'll be prompted with a check
digit as shown below. Verify the check digit
with the information provided by the processor.
Check digits appear after entering both the
right and left portion of each part of the key.
Compare the check digit against the number
located at the top of the key component. This
represents a check digit for the combined
keys. There is not a check digit shown for left
and right portions individually.
C.6
Operator Manual
© Genmega 2012
Hide quick links:
Advertisement
Table of Contents
