Table of Contents
Advertisement
3. Open the SD card in 'My Computer', and create a folder called "Common".
4. Open the "Common" folder, and create a sub-folder called "img4SCR".
5. Inside the img4SCR folder is where you want to copy all your graphic files.
- The graphic files must follow the naming convention that we describe on page
1. (ie: center1.bmp, center2.bmp).
6. Once your graphic files are copied, insert the SD card into the SD card slot on
the mainboard located behind the LCD.
7. Power off, then power on the 2500™ with the power supply switch.
8. When the ATM is fully initialized then remove the SD card.
Enabling the Center Graphics:
1. Go into the Operator Menu.
2. Then to Customer Setup > Graphics > Advertise EN/Disable and go through
each advertisement you want to show up and turn it ON.
Windows XP users:
Before creating the file in step #2, you may need to change your file options.
Open a folder and click on "Tools", select Folder Options
Custom Graphics
Make sure Folder Options match
those shown here. Specifically the
"Hide extensions for known file
types" option which needs to be
unchecked.
If these options are not set properly,
the update.acu file may not function,
causing the graphics to not load.
D.3
Operator Manual
© Genmega 2012
Hide quick links:
Advertisement
Table of Contents
