Genmega G2500 series Operator's Manual page 103

Operator Manual
How to install Coupon Graphic
If ordered with the optional 3" wide receipt printer, the G2500 is capable of printing a low
resolution graphic on each receipt.
To use this feature, you'll need to create the graphic (BMP file format) to the
specifications listed below, and then add the file to the machine using the SD RAM card
slot located on the rear of the main circuit board.
Once the graphic is loaded, it will copy into memory each time the machine is powered
on. This eliminates the need to copy the graphic each time a receipt it printed.
File Specification
File Format: 2 color (1bit) bmp
Maximum Image Width: 576 pixels
Height: Variable (depends on the width)
Maximum file size: 16KB
Maximum Dimensions: 576 pixels (W) x 222 pixels (H)
File Name = LogoImg.bmp (save file as)
** Please note that the maximum file size is CRITICAL.**
You cannot exceed 16KB. Adjust the height and width of your graphic to ensure it's
under that size cap. Also, 2 color graphics mean white and black only, do not use grey-
scale.
File location on G2500 (download image with SD CARD)
From the root of the SD CARD:
Common\Img4SCR\LogoImg.bmp
Copy the file from your PC to that path on the SD Card. If the SD card is otherwise
blank, you'll need to create a blank file (with notepad) called update.acu. Open up
notepad with a new blank file and then "Save As" and name it update.acu and save it to
the root of the SD Card. The presence of that file in the root tells the G2500 to copy the
graphic file into memory.
Once the graphic file has been uploaded to the machine, you need to enable it within the
Operator Function Menu.
Customer Setup Coupon Setting Logo Enable
Once this has been done, upon exiting the Operator Menu, you'll see a notice that the
graphic is being loaded into memory. This screen will reappear each time you power off
and on the ATM.
Custom Graphics D.4 © Genmega 2012