Denomination - Genmega G2500 series Operator's Manual

3.5.2 DENOMINATION

The Denomination is the type of bill that each cassette will be dispensing. The ATM offers a
second cassette as an option. This second cassette can be programmed to dispense notes, it
can also dispense a preset number of bill sized coupons with each transaction and finally it can
dispense a "value coupon", where you would set the value of the coupon and the customer could
purchase this using their card.
WARNING
: Any change to the denomination will cause all master keys to be deleted from the
EPP keypad. If you attempt to enter the denomination setup menu, you will be prompted and
warned that continuing will cause all master keys to be erased. The purpose of this is to prevent
unauthorized changes to this critical setting.
When programming the ATM, make sure to make any changes to the denomination setting
BEFORE you program master keys. Once keys are erased, they cannot be recovered. New
master keys will have to be loaded.
When programming the ATM, make sure to make any changes to the
denomination setting BEFORE you program master keys.
Once keys are erased, they cannot be recovered. New master keys will have to
be loaded.
To set denomination on the first cassette, press the First CST Denomination button and then
using the main keypad enter the type of bill. Options are $1, $5, $10, $50 and $100.
To set denomination on the second cassette, press the Second CST Denomination button and
then using the main keypad enter the type of bill. Options are $1, $5, $10, $50 and $100.
Programming 3.33
Operator Manual
© Genmega 2011