Trial Day Total - Genmega G2500 series Operator's Manual

3.2.8 TRIAL DAY TOTAL

Trial Day Total feature allows the ATM to complete a Day Total operation (without actually closing
out the machine) at a predetermined time each day. This is useful if you are doing accounting of
your ATM on a day-to-day basis. Your processor cuts off its transactions each day at a set time.
By enabling Trial Day Total at the same time, your day's balance should match the host. This
information will appear as a journal record, so you will need to access your journal to print or view
the totals. Your dealer or processor can provide you with the appropriate cut off time.
Trial Day Total Set
Change Time
Programming
Enables or Disables the function
Sets the time for the ATM to total itself
3.14
Operator Manual
© Genmega 2011