Optional Features - Genmega G2500 series Operator's Manual

Operator Manual

3.4.3 OPTIONAL FEATURES

The G2500™ ATM offers several optional functions to improve performance and keep the ATM
functional in the event of a paper problem (jam, out of paper etc.)
LOCATION NAME
Adding a name to this location will print the name entered onto the journal records and print all
setup. This is purely a convenience option and is not required.
SELECT RECEIPT
This feature allows the ATM to complete transactions even though it may not be able to dispense
a receipt. If the ATM experiences a paper jam, or runs out of paper, the customer will be asked if
they would like to complete the transaction even though they will not receive a receipt. If the
customer answers Yes, the transaction will continue. Following the transaction the customer's
information (what would have appeared on the receipt) will display on the screen. The ATM will
continue to operate without use of the printer until someone accesses the Operator Function
menu. At that time the error must be corrected before the ATM will go back into service.
To enable the option, press Select Receipt, the lower portion of the screen will display the options
status.
TRANSFER TO CREDIT
Some networks do not allow customers to transfer funds to or from their credit cards. By enabling
/ disabling this option you will add or remove the option button from the customer menus. Check
with your Distributor / Processor as to whether or not they support fund transfer to or from credit
cards. NOTE: If your network does not support such transfers and you leave the option enabled,
the customer can choose it from the menu however the network will not authorize the transaction.
CHECK BALANCE
Enabling this option will ask each customer if they would like to check their balance before each
transaction.
Programming 3.26 © Genmega 2011