Genmega G2500 series Operator's Manual page 88

ERROR ERROR DESCRIPTION
CODES
C005A Undefined
nd
C005B 2 cassette fails to pick up
notes
rd
C0060 3 cassette inlet sensor not
cleared
rd
C0062 3 cassette inlet sensor not
cleared
nd
C006A Note jam at 2
th
C0070 4 cassette inlet sensor not
cleared
th
C0072 4 cassette inlet sensor not
cleared
th
C007A Note jam at 4
th
C007C 4 cassette fails to pick up
notes
th
C007D 4 cassette not inserted
nd
C0080 2 cassette inlet sensor not
cleared
C0081 Double detect sensor not
cleared while dispensing
C0082 Note leaving cassette exit
sensor did not reach DD
C0083 Reject gate timing sensor #2
not cleared during dispense.
C0084 Reject gate timing sensor #3
not cleared during dispense.
C0085 Note leaving DD sensor did
not reach gate sensor
C0086 Note leaving gate sensor did
not reach count sensor
C0090 Sensor check error
C0091 Sensor check error
C0092 Sensor check error
C0093 Sensor check error
C0094 Sensor check error
C0095 Sensor check error
C0096 Sensor check error
C0097 Sensor check error
rd
C009A Note jam at 3
rd
C009D 3 cassette not inserted
rd
C009F 3 cassette fails to pick up
notes
D0001 Modem initializing failure.
D0002 Reversal transaction failed.
D0012 Invalid transaction.
D0013 Invalid Amount.
D0014 Invalid Card Number.
D0020 Surcharge screen should have
been displayed.
Error Codes
CORRECTIVE ACTION
Same as C0047, the second cassette is likely empty.
Check for notes where the 3
Check for notes where the 3
cassette exit Check rollers and sensors where notes would leave the 2
cassette.
Check for notes where the 4
Check for notes where the 4
cassette exit Check rollers and sensors where notes would leave the 4
cassette.
Same as C0047/C005B, verify that there are notes in the 4
cassette.
Check cassette and verify that it's inserted properly.
Check for notes where the 2
Check double-detect senor for note or obstruction.
A note seen at cassette exit sensors did not reach the double
detect module. Check for jammed notes.
Clear the note path before the reject gate.
Clear the note path before the reject gate.
Check the note path for jammed or diverted notes. Check sensors
from #5 to #2/#3.
Check for jammed notes between #2/#3 sensors and #0/#1
sensors.
Left measuring sensor A (#6/#7)
Right measuring sensor B (#6/#7)
Left gate timing sensor A (#2/#3)
Right gate timing sensor B (#2/#3)
Exit sensor (#4)
Double Detect (#5)
Left count sensor A (#0/#1)
Right count sensor B (#0/#1)
cassette exit Check rollers and sensors where notes would leave the 3
cassette.
Check cassette and verify that it's inserted properly.
Similar to C0047, C005B verify that there are notes in the cassette.
This error is reported from the host. Check that programming is
correct for this processor.
Check transaction with the processor. Verify CDU functionality
with diagnostics. Verify phone connection.
Network denial code.
Network denial code.
Network denial code.
Network denial code.
rd
cassette engages the dispenser.
rd
cassette engages the dispenser.
th
cassette engages the dispenser.
th
cassette engages the dispenser.
nd
cassette engages the dispenser.
A.3
Operator Manual
nd
th
th
rd
© Genmega 2012