Device Setup - Genmega G2500 series Operator's Manual

Operator Manual

3.3.6 DEVICE SETUP

The Device Setup menu provides options to adjust parameters of the various peripherals. Under
normal circumstances you should not need to make changes to these parameters. The default
settings are optimized for your particular machine.
Genmega recommends only using these tools under the direction of an Authorized Service
Provider (ASP) or Genmega Technical Support.
3.3.6.1 SPR SETUP
The SPR Setup allows you to set the maximum column width for the receipt printer. Default is 40
characters.
Programming 3.19 © Genmega 2011