Operator Manual
3.3 THE SYSTEM SETUP MENU
3.3.1 SET CLOCK
The Set Clock menu allows you to set the clock built into the ATM to the appropriate date and
time. You should set this for local time in the area the machine is to be installed. Note that with
each transaction you will see also see a "Host" time, this is the local time for the processor and
may be different from local time at the ATM. To set the clock, simply press the Set Clock button
and press the key corresponding to the function you want to set (month, day, year, etc.)
NOTE: The ATM will not automatically adjust for daylight savings time. You must set this
manually if you wish it to change.
Programming
3.15
© Genmega 2011