Table of Contents
Advertisement
3.3.6.5 CDU SETUP
The CDU (Cash Dispensing Unit) or Dispenser contains programming relative to its application
and country of destination. This programming does not need to be altered, however in the event
that the dispenser looses its factory programming the CDU Setup application can correct any
problems. NOTE: Incorrect programming of the dispenser will cause the machine to go out of
service.
Country Setting: Set to USA or Canada
Cassette Number: Set to 1 or 2 depending on number of cassette
CDU Type:
CDU Model
TCDU / SCDU
MCDU / HCDU
Rear Load MCDU
De La Rue
Teanam
Puloon
Configuring Dispenser:
Once the settings are correct, then press 'Apply' to configure the dispenser.
If you get the error 'No Comm' or CDNxx, it means that either the settings are incorrect for the
dispenser type (for example if you try to program a SCDU as a De La Rue SDD, it will not work)
or if there is a problem with the cables that connect the dispenser to the main control board.
Note: Installing different dispensers may require additional hardware, check with Support before
installing if you are unsure.
Programming
Set CDU Type
Front Loader 1K
Front Loader 2K
Rear Loader 2K (*not available on G2500)
SDD with S/M
GBM
LCDM1000
3.21
Operator Manual
© Genmega 2011
Hide quick links:
Advertisement
Table of Contents
