Table of Contents
Advertisement
LAST X PRINT
The Last X Print option allows you to bypass the marker set when printing a journal and go back
to recover an older record (so long as the record still exists in memory). For example, you print a
journal and it includes sequence numbers <00001> to <00100>. If you wanted to go back and
reprint journal number <00080> you would need to do a Last X Print for 20 records (100-20=80)
this would give you records 100-80. To do a Last X Print, press the button and then enter a value
of how many records you wish to go back.
CLEAR TRANSACTION SEQUENCE NUMBER
This function will reset the journal sequence number back to <00000>. This may be useful if you
switch processing or switch Terminal ID numbers and want to keep new records.
VIEW JOURNAL
CLEAR JOURNAL
Clear Journal sets the current journal marker to the most recent journal recorded. It does not
delete the journal from memory. For example: You currently have 100 entries in your journal, you
press Clear Journal. Now if you press Print Journal, nothing will happen because there are no
current journal entries, however if you used Last X Journal, you could enter 100 and get all the
records.
COPY JOURNAL TO EXTERNAL DEVICE (USB / SD)
This option allows you to copy the contents of your electronic journal to an external memory
device including a USB Drive or SD Memory Card. To copy the journal, insert the memory device
in the socket located behind the LCD screen (top edge) and then press the button in the journal
menu which corresponds with the type of memory device being used. To read this journal, you'll
need to download a free utility from the Genmega website (or request from your ATM distributor).
This utility will allow you read / sort and print entries from the journal that was recovered from the
ATM. The file that is saved on your memory device is named after the Serial number
programmed at the terminal, so you can pull the journal from several ATMs onto the same
memory device without worry of overwriting. Note that it can take several minutes to copy the
journal depending on how many records are stored in the ATM. So be patient when
waiting for the files to copy.
Operation
View Journal allows you to visually
inspect the journal records. Press the
View Journal button and you will see
the screen to the left.
Use the Arrow keys on the main keypad
to scroll through the records. You can
also use the buttons next to +50 and -
50 to go forward or backwards 50
records at a time. Use the Enter button
to print the journal entry currently
displayed. Press Cancel to exit this
menu.
4.21
Operator Manual
© Genmega 2012
Hide quick links:
Advertisement
Table of Contents
