Iso 1/3 En/Disable; Change Passwords - Genmega G2500 series Operator's Manual

3.3.4 ISO 1, 3 EN/DISABLE
The ISO Tracks are the three tracks available for the card swipe head to read. The ATM is
already defaulted to read from Track #2 (which is why it's not shown). This parameter should not
be changed. Changing the ISO tracks can cause the ATM to not read cards properly.

3.3.5 CHANGE PASSWORDS

The ATM uses three passwords to provide security to the operator menu system. These are
Operator, Service and Master.
•
Operator Password (allows access to basic menu structure)
•
Service Password (allows access to basic and diagnostic menus)
•
Master Password (allows access to all menus including setup parameters)
The operator password can be changed by anyone with the current operator password. The
service and operator passwords can be changed by anyone with the service password. The
master password can only be changed by someone with the current master password. Any
password can be changed using the master password.
For example, if you have lost the operator or service password, you can use your master
password to change them. Simply enter the master password when it requests the operator or
service password and then enter the new password.
You are required to change the master password from default before the ATM can go in service.
Programming 3.17
Operator Manual
© Genmega 2011