Step 5: Attach The Label; Step 6: Connect The Power Cord And The Cable - Roland VersaUV LEC2-330 Setup Manual

D
Install the retainer indicated by B at the position indicated in the figure for storage.
Bolt removed in step 3

Step 5: Attach the Label

This work is required when using the machine with the following ink types.
• CMYK
• CMYKReOrWhWh
• CMYKReOrGlWh
• CMYKReOrPrWh
Items Used in this Procedure
Included items

Step 6: Connect the Power Cord and the Cable

Procedure
A
Insert the cable clamp.
Cartridge-slot label (for four colors)
Cartridge-slot label (for seven or eight colors)
2. Assembly and Ink Filling
2.Installation
33