SMC Networks HRS012-A*-10-* Operation Manual page 98

HRX-OM-M090
Chapter 5 Display and setting of various functions
38.
Select the changing of electric resistivity dropfrom the table below with [▲] key or [▼]
key, and confirm by pressing "SEL".
Set value
Changing of lower limit of electric resistivity drop Setting and checking
39.
Press the [SEL] key once.
The set screen of the changing of lower limit of electric resistivity drop is displayed on
the digital display.
PV
SV
40.
Select the changing of lower limit of electric resistivity drop from the table below with
[▲] key or [▼] key, and confirm by pressing "SEL".
Set value
to
How to monitor the temperature alarm Setting and Checking
41.
Press the [SEL] key once.
Setting screen of the temperature alarm monitoring method is displayed on the digital
display.
PV
SV
5.15 Alarm customize function
5-46
Table 5.15-20 List of set value
Explanation
Setting/checking are not available if the
setting of the DI option is OFF.
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
Table 5.15-21 List of set value
Explanation
Setting/checking are not available if the
setting of the DI option is OFF and changing
of lower limit of electric resistivity drop is OFF.
Sets lower limit of electric resistivity drop.
Set unit is 0.1MΩ･cm unit.
Initial value
(Default setting)
○
Initial value
(Default setting)
HRS Series