SMC Networks HRS012-A*-10-* Operation Manual page 90

HRX-OM-M090
Chapter 5 Display and setting of various functions
Changing of circulating fluid discharge temperature rise Setting and checking
4.
Press the [SEL] key once.
The set screen of changing of circulating fluid discharge temperature rise is displayed on
the digital display.
PV
SV
5.
Select changing of circulating fluid discharge temperature rise from the table below with
[▲] key or [▼] key, and confirm by pressing "SEL".
Set value
Detection temperature for circulating fluid discharge temperature rise Setting and checking
6.
Press the [SEL] key once.
The set screen of detection temperature for circulating fluid discharge temperature rise is
displayed on the digital display.
PV
SV
7.
Select detection temperature for circulating fluid discharge temperature rise from the
table below with [▲] key or [▼] key, and confirm by pressing "SEL".
Set value
Centigrade
to
Fahrenheit
to
5.15 Alarm customize function
5-38
Table 5.15-4 List of set value
Explanation
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
Operation is stopped when this alarm signal is
generated.
Table 5.15-5 List of set value
Explanation
Setting/checking are not available if the
setting of the circulating fluid discharge
temperature rise is OFF.
Sets detection temp for the circulating fluid
discharge temperature rise.
Temperature unit is Centigrade : Setting unit is
o
0.1 C
Temperature unit is Fahrenheit : Setting unit is
o
0.1 F
Initial value
(Default setting)
○
Initial value
(Default setting)
HRS Series