SMC Networks HRS012-A*-10-* Operation Manual page 77

Offset temperature Setting and checking
4.
Press the [SEL] key once.
The set screen of offset temperature is displayed on the digital display.
PV
SV
5.
Select offset temperature from the table below with [▲] key or [▼] key, and confirm by
pressing "SEL".
Set value
Centigrade
to
Fahrenheit
to
This function controls the offset temperature to the circulating fluid
discharge temperature
Control range of the circulating fluid temperature is 5.0℃ to 40.0℃
(41.0 ﾟ F to 104.0 ﾟ F).
When the circulating fluid temperature is set to 5.0
offset temperature to -20.0
automatically adjusted to 0.0oC (0.0
mode.
6.
Press the [MENU] key once.
Return to the main screen (screen displaying the circulating fluid temperature).
PV
SV
HRS Series
Table 5.8-3
Explanation
Setting and checking are not available when
offset mode setting is OFF.
Sets offset temperature.
Temperature unit is Centigrade : Setting unit is
o
0.1 C
Temperature unit is Fahrenheit : Setting unit is
o
0.1 F
Chapter 5 Display and setting of various functions
List of set value
o o
C (-36.0 F), the offset temperature is
o
F) depending on the offset
HRX-OM-M090
Initial
(Default setting)
o
C (41oF) and the
5.8 Offset function
5-25