SMC Networks HRS012-A*-10-* Operation Manual page 97

34.
Select the changing of electric resistivity rise from the table below with [▲] key or [▼]
key, and confirm by pressing "SEL".
Set value
Changing of upper limit of electric resistivity rise Setting and checking
35.
Press the [SEL] key once.
The set screen of the changing of upper limit of electric resistivity rise is displayed on the
digital display.
PV
SV
36.
Select the changing of upper limit of electric resistivity rise from the table below with [▲]
key or [▼] key, and confirm by pressing "SEL".
Set value
to
Changing of electric resistivity drop Setting and checking
37.
Press the [SEL] key once.
The set screen of the changing of electric resistivity drop is displayed on the digital
display.
PV
SV
HRS Series
Table 5.15-18 List of set value
Explanation
Setting/checking are not available if the
setting of the DI option is OFF.
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
Table 5.15-19 List of set value
Explanation
Setting/checking are not available if the
setting of the DI option is OFF and changing
of Upper limit of electric resistivity rise is OFF.
Sets Upper limit of electric resistivity rise.
Set unit is 0.1MΩ･cm unit.
Chapter 5 Display and setting of various functions
HRX-OM-M090
Initial value
(Default setting)
○
Initial value
(Default setting)
5.15 Alarm customize function
5-45