SMC Networks HRS012-A*-10-* Operation Manual page 96

HRX-OM-M090
Chapter 5 Display and setting of various functions
30.
Select the changing of DC line fuse cut from the table below with [▲] key or [▼] key,
and confirm by pressing "SEL".
Set value
Changing of water leakage Setting and checking
31.
Press the [SEL] key once.
The set screen of the changing of water leakage is displayed on the digital display.
PV
SV
32.
Select the changing of water leakage from the table below with [▲] key or [▼] key, and
confirm by pressing "SEL".
Set value
Changing of electric resistivity rise Setting and checking
33.
Press the [SEL] key once.
The set screen of the changing of electric resistivity rise is displayed on the digital
display.
PV
SV
5.15 Alarm customize function
5-44
Table 5.15-16 List of set value
Explanation
Operation continues when this alarm signal is
generated.
Operation is stopped when this alarm signal is
generated.
Table 5.15-17 List of set value
Explanation
Setting/checking are not available if the
setting of the water leakage option is OFF.
Operation continues when this alarm signal is
generated.
Operation is stopped when this alarm signal is
generated.
Initial value
(Default setting)
○
Initial value
(Default setting)
○
HRS Series