SMC Networks HRS012-A*-10-* Operation Manual page 94

HRX-OM-M090
Chapter 5 Display and setting of various functions
Changing of operation when communication error Setting and checking
20.
Press the [SEL] key once.
The set screen of changing of operation when communication error is displayed on the
digital display.
PV
SV
21.
Select changing of operation when communication error from the table below with [▲]
key or [▼] key, and confirm by pressing "SEL".
Set value
The monitoring time of communication error Setting and checking
22.
Press the [SEL] key once.
The set screen of the monitoring time of communication error is displayed on the digital
display.
PV
SV
23.
Select the monitoring time of communication error from the table below with [▲] key or
[▼] key, and confirm by pressing "SEL".
Set value
to
Changing of Contact input signal 1 detection Setting and checking
24.
Press the [SEL] key once.
The set screen of the changing of contact input signal 1 detection is displayed on the
digital display.
PV
SV
5.15 Alarm customize function
5-42
Table 5.15-12 List of set value
Explanation
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
Operation is stopped when this alarm signal is
generated.
Table 5.15-13 List of set value
Explanation
Setting/checking are not available if the
setting of the communication error is OFF.
Sets communication error.
Set unit is 1 sec. unit.
Initial value
(Default setting)
○
Initial value
(Default setting)
HRS Series