SMC Networks HRS012-A*-10-* Operation Manual page 95

25.
Select the changing of contact input signal 1 detection from the table below with [▲]
key or [▼] key, and confirm by pressing "SEL".
Set value
Changing of Contact input signal 2 detection Setting and checking
26.
Press the [SEL] key once.
The set screen of the changing of contact input signal 2 detection is displayed on the
digital display.
PV
SV
27.
Select the changing of contact input signal 2 detection from the table below with [▲]
key or [▼] key, and confirm by pressing "SEL".
Set value
28.
Press the [MENU] key once.
Return to the main screen (screen displaying the circulating fluid temperature).
PV
SV
Changing of DC line fuse cut Setting and checking
29.
Press the [SEL] key once.
The set screen of the changing of DC line fuse cut is displayed on the digital display.
PV
SV
HRS Series
Table 5.15-14
Explanation
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
Operation is stopped when this alarm signal is
generated.
Table 5.15-15
Explanation
This alarm signal is not detected.
Operation continues when this alarm signal is
generated.
Operation is stopped when this alarm signal is
generated.
Chapter 5 Display and setting of various functions
List of set value
List of set value
HRX-OM-M090
Initial value
(Default setting)
○
Initial value
(Default setting)
○
5.15 Alarm customize function
5-43