SMC Networks HRS012-A*-10-* Operation Manual page 73

5.
Select READY band width (upper/lower temperature range) from the table below with
[▲] key or [▼] key, and confirm by pressing "SEL".
Set value
Centigrade
to
Fahrenheit
to
READY time Set and checking
6.
Press the [SEL] key once.
The set screen of READY time is displayed on the digital display.
PV
SV
7.
Select READY time from the table below with [▲] key or [▼] key, and confirm by
pressing "SEL".
Set value
to
8.
Press the [MENU] key once.
Return to the main screen (screen displaying the circulating fluid temperature).
PV
SV
HRS Series
Table 5.7-3 List of set value
Explanation
Setting and checking are not available when
READY mode setting is OFF.
Set READY band
temperature range) for the circulating fluid
temperature
Temperature unit is Centigrade : Setting unit is
o
0.1 C
Temperature unit is Fahrenheit : Setting unit is
o
0.1 F
Table 5.7-4
Explanation
Setting and checking are not available when
READY mode setting is OFF.
Sets ultimate time.
Set unit is 1 sec.
Chapter 5 Display and setting of various functions
width (upper/lower
List of set value
5.7 Signal for completion of preparation (TEMP READY)
HRX-OM-M090
Initial
(Default setting)
Initial value
(Default setting)
5-21