SMC Networks HRS012-A*-10-* Operation Manual page 112

HRX-OM-M090
Chapter 5 Display and setting of various functions
22.
Select parity check (simple communication protocol) from the table below with [▲] key
or [▼] key, and confirm by pressing "SEL".
Set value
Stop bit（simple communication protocol） Setting and checking
23.
Press the [SEL] key once.
The set screen of stop bit （simple communication protocol） is displayed on the digital
display.
PV
SV
24.
Select stop bit (simple communication protocol) from the table below with [▲] key or [▼]
key, and confirm by pressing "SEL".
Set value
Response delay time (simple communication protocol) Setting and checking
25.
Press the [SEL] key once.
The set screen of response delay time (simple communication protocol) is displayed on
the digital display.
PV
SV
5.18 Communication function
5-60
Table 5.18-12 List of set value
Explanation
Setting/checking are not available unless the
serial protocol setting
communication protocol.
None
Odd number
Even number
Table 5.18-13 List of set value
Explanation
Setting/checking are not available unless the
serial protocol setting
communication protocol.
1 bit
2 bit
Initial value
(Default setting)
is simple
Initial value
(Default setting)
is simple
○
○
HRS Series