Paddle Section - Konica Minolta Magicolor 8650 Service Manual

Field Service Ver. 1.0 Nov. 2007
[3]
[2]
[1]
[2]
[1]
2.3.13

Paddle section

1. Remove the finisher tray.
See P.16
[2]
Confidential – for internal use only, do not distribute
[4]
[4]
[5]
A0D6F2C534DA
A0D6F2C535DA
[1]
A0D6F2C536DA
7. Remove the C-clip [1], and remove
the spacer [2], and remove the belt
[3] from the gear.
8. Disconnect the connector [4], and
remove the harness from the wire
saddle [5].
9. Remove two screws [1], and remove
the finisher tray [2] by sliding it to the
far side and lifting it.
2. Place the finisher tray [1] as shown
in the figure.
NOTE
• Be careful not to damage the align-
ing plate [2].
2. Other
17