Konica Minolta Magicolor 8650 Service Manual page 79

3. Periodical check
C. Reinstall procedure
[1]
[1]
3. Install the toner cartridges of all colors.
See toner cartridge replacement/installation procedure steps 1 and 2.
See P.35
4. Install the imaging units of all colors.
See imaging unit replacement/installation procedure steps 1 and 2.
See P.31
5. Close the right door.
6. Turn on the power switch.
38
Confidential – for internal use only, do not distribute
1. Insert the transfer belt unit [1].
NOTE
• Insert the transfer belt unit with
care not to allow its docking gear to
be damaged by hitting it against the
rail or associated part.
• Do not touch the surface of the
image transfer belt unit.
• Cover the image transfer belt unit
with something such shade cloth to
protect its surface from dust or for-
eign matter.
A02EF2C305DA
2. Install the transfer belt unit with two
NOTE
• Replace the ozone filter, which is
supplied with the transfer belt unit,
at the same time.
A02EF2C307DA
Field Service Ver. 2.0 Nov. 2007
screws [1].