Replacing The Paper Feed Tray 2 Separation Roller Assy - Konica Minolta Magicolor 8650 Service Manual

Field Service Ver. 2.0 Nov. 2007
3.4.6

Replacing the paper feed tray 2 separation roller assy

A. Periodically replacing parts/cycle
• Paper feed tray 2 separation roller assy: Every 300,000 prints
B. Procedure
1. Slide out the paper feed tray 2.
2. Remove the paper feed tray 1.
See P.83
3. Remove the paper feed tray 2 separation roller assy.
See the replacement procedures 1 to 6 in "paper feed tray 2 feed roller/paper feed tray
2 pick-up roller."
See P.18
[1]
[2] [3]
[2]
[1]
6. To reinstall, reverse the order of removal.
Confidential – for internal use only, do not distribute
[5]
[4] [1]
A02EF2C013DA
A02EF2C014DA
3. Periodical check
4. Remove two C-clips [1], the shaft [2],
spring [3], and guide [4].
Remove the separation roller fixing
plate assy [5].
5. Remove two C-clips [1], and remove
the paper feed tray 2 separation
roller assy [2].
21