Konica Minolta Magicolor 8650 Service Manual page 454

Field Service Ver. 2.0 Nov. 2007
12. When Internet ISW is complete successfully, the control panel displays the message as
shown in the following illustration.
B. Completed or failed
(1) Firmware updated normally
1. When the Firmware is normally updated, restart the main body in auto or manual mode
to display the outcome, and press the Menu/Select key to return to the main screen.
(2) Failing to update the firmware due to the network trouble
1. When updating failed to complete due to the trouble on connecting to the network, an
error code and the message will be displayed.
2. Restart the main body in auto or manual mode, and press the Menu/Select key. It can
be used with the firmware version before conducting updating.
3. Check the settings for the network by error codes, and try updating again.
NOTE
• For error codes, refer to "Error code list for the Internet ISW".
See P.14
(3) Firmware rewrite failure after firmware download is started
1. Upon starting the firmware rewrite, the main body ROM data is deleted.
If an error occurs after starting the firmware rewrite, the machine starts rebooting itself
and displays the standby screen to wait for the restart instruction.
2. Press the Menu/Select key on the standby screen, and try reconnecting to the server.
NOTE
• Return to the standby screen without fail after turning the power switch OFF/ON if
the firmware is not updated.
• Firmware can be updated with the Compact flash with the power switch OFF.
C. Confirming the firmware version
1. Call the Service Mode to the screen.
2. Select [Management List] which is available from [List Output], and print out the
machine management list.
3. Check if the firmware version is updated.
Confidential – for internal use only, do not distribute
Net Client Result
Upgrade successful
2. Firmware upgrade
A02EF2C281DA
13