Konica Minolta Magicolor 8650 Service Manual page 213

8. Utility Mode
<Discovery User>
Functions
• To set whether or not to enable the discovery authority user which is used for SNMP
v3.
Use
Setting/ • The default setting is ON.
Procedure
<Discovery User Name>
Functions
• To set the name of the discovery authority Users which is used for SNMP v3.
Use
Setting/
• Enter the discovery user name (up to 32 characters) using
Procedure
press the Menu/Select key.
NOTE
• The user name same with the read user name or the write user name cannot
be set.
<Read User Settings: Read User Name>
Functions
• To set the read-only user name used for SNMP v3.
Use
Setting/
• Enter the read user name (up to 32 characters) using
Procedure
Menu/Select key.
NOTE
• The user Name same with the discovery user name cannot be used.
<Read User Settings: Security Level>
Functions • To set the security level of the read-only user used for SNMP v3.
Use • To use when changing the security level of the read-only user.
OFF
Auth-password
Auth/Priv-password : Conducts authentication by authentication password and
Setting/ • The default setting is Auth/Priv-password.
Procedure
OFF
<Read User Settings: Password>
Functions
• To set the Authentication password for the read-only User which is used for SNMP
v3.
Use
Setting/ 1. Select a type of password.
Procedure 2. Enter the password (up to 32 characters) using
Menu/Select key.
172
Confidential – for internal use only, do not distribute
"ON"
: No authentication will be conducted when the read-only
user accesses.
: Conducts authentication only for the authentication pass-
word when the read-only user accesses.
privacy password when read-only User accesses.
Auth-password
Field Service Ver. 2.0 Nov. 2007
OFF
and keys, and
and keys, and press the
"Auth/Priv-password"
and keys, and press the