Centering (Duplex) - Konica Minolta Magicolor 8650 Service Manual

5. Mechanical adjustment
5.1.2

Centering (Duplex)

1. Call the Service Mode to the screen.
See P.202 of the main body service manual.
2. Select [MachineAdjustment] → [Printer Area] → [Centering(Duplex)] → [Tray 4].
3. Press the Menu/Select key
4. Select [Print] and press the Menu/Select key to let the machine produce a test print.
8. Press the Menu/Select key.
9. Turn OFF the power switch, then wait for 10 sec. or more and turn ON the power
switch.
24
Confidential – for internal use only, do not distribute
A
4061F3C809DA
Field Service Ver. 1.0 Oct. 2007
5. Measure the width of printed refer-
ence line A.
Specification: 3.0 mm
6. If the measured width A falls outside
the specified range, enter the correc-
tion value using the
7. Produce another test print and check
to see if width A falls within the spec-
ified range.
2.0 mm
±
or keys.