Konica Minolta Magicolor 8650 Service Manual page 289

10. Service Mode
Step
Using the telephone line modem
Setting the date and time for CS Remote Care
1. Select [Service Mode] → [CS Remote Care] → [Detail Settings].
2. Select [Date/TimeSettings].
5
3. Input the date, time and the time zone using the
key.
See P.257
Setting the Center ID
1. Select [Service Mode] → [CS Remote Care] → [Detail Settings].
6
2. Select [Basic Settings] → [Center ID], and input the Center ID (five digits).
See P.257
Setting the Device ID
1. Select [Service Mode] → [CS Remote Care] → [Detail Settings].
7
2. Select [Basic Settings] → [Device ID], and input Device ID (nine digits).
See P.257
Proceed to step 9.
8
Setting the telephone number of the Center
1. Select [Service Mode] → [CS Remote Care]
→ [Detail Settings].
2. Select [Basic Settings] → [Center Tel Num-
9
ber].
3. Input the telephone number of the center
using 0 to 9 and [P], [T], [W], [,].
See P.257
Inputting the device telephone number
1. Select [Service Mode] → [CS Remote Care]
→ [Detail Settings].
2. Select [Basic Settings] → [Device Tel Num-
10
ber].
3. Input the Device telephone number using 0
to 9 and [P], [T], [W], [,].
See P.257
248
Confidential – for internal use only, do not distribute
Field Service Ver. 2.0 Nov. 2007
Procedure
Using E-mail
and keys, and press the Menu/Select
Encryption setting
1. Select [Service Mode] → [CS Remote Care]
→ [Detail Settings].
2. Select [Basic Settings] → [Encryption] and
select either ON or OFF.
Retransmission interval on e-mail delivery error
• When selecting [E-mail 2], set the retrans-
mission interval on e-mail delivery error in
software SW setting.
See P.250
Setting the Respond Timeout
1. Select [Service Mode] → [CS Remote Care]
→ [Detail Settings].
2. Select [Response Timeout] and enter the
response timeout using the
NOTE
• Under normal conditions, there is no
need to change the default setting.
See P.257
Proceed to step 11.
and keys.