Operation; About The Projector - Christie DS+60 User Manual

3.1 About the
Projector
Exterior
Built-in Keypad
013-100149-02 Rev. 1 (01/07)
This section explains how to effectively operate the projector once it has been
installed. It is recommended that you read this section and familiarize yourself with
the components and the available menu options before you begin using your projector
for the first time.
1 Top cover
2 Built-in keypad
3 AC receptacle
4 Adjustable feet (3)
5 Projection lens
6 Front IR sensor
7 Bottom chassis
8 Lens release button
(1) & (7) The projector's top cover and bottom chassis form the shell of the projector.
All optical, electrical, and other miscellaneous components are housed between these
two parts.
(2) The built-in keypad is located on the top, right side of the projector. It's an
alternate method to using the IR remote for projector control. It has a few less direct
keys than the IR remote, but includes an LED display, which continually displays the
projector's status.

Operation

9
10
11
12
13
14
15
Figure 3.1. Projector Basics
Christie DS+60/DW3K/Matrix 3000 User's Manual
Section 3
Air vents
Rear input panel
Rear IR sensor
Rear exhaust
Lamp 1 Access (Door)
Lamp 2 Access (Door)
Slot for Kensington Security Lock
3-1