Download Print this page

Removing The High Limit Thermostat; Removing The Thermal Limiter (Electric Dryers); Removing The Heating Element Assembly (Electric Dryers) - Electrolux 27" Electric Dryers Service Manual

Gas & electric models
Hide thumbs

Advertisement

Note: Do not lose the grounding ball or the tinnerman
mounting clip from the rear of the dryer.

Removing the high limit thermostat:

1. Disconnect the dryer from electrical supply and
remove the drum.
2. Disconnect the two wires and remove the two
screws holding thermostat to the heating element
assembly.
Removing the thermal limiter: (Electric dryers)
1. Disconnect the dryer from electrical supply and
remove the drum.
2. Disconnect the two wires and remove the two
screws holding limiter to the rear panel.
Removing the heating element assembly: (Electric
dryers)
1. Disconnect the dryer from electrical supply and
remove the drum.
2. Disconnect the two wires from the heating ele-
ment.
3. Remove the high limit thermostat.
4. From the rear of the dryer remove the four screws
securing the heating element assembly to the rear
of the cabinet.
74

Advertisement

loading

  Related Manuals for Electrolux 27" Electric Dryers