Overheating Thermostat - Electrolux T3900 Service Manual

27
27. Sensors and overheating thermostats
Inlet air - Overheating thermostat
Function
The inlet overheating thermostat opens automatically in the event of overheating, and
shuts off the dryer.
The thermostat opens and has to be reset manually.
Resetting
Electric heated dryers, fig. 1a+1b
The overheating thermostats (2 pcs) are located behind the front shutter of the dryer,
- one on side of the heating unit 1a and one just above the heating elements 1b.
Gas heated dryers, fig. 2
The overheating thermostat is located behind the front shutter of the dryer on the left side
of the gas heating unit.
Note! In order to reset the thermostats, open the front shutter and press the reset button
A on the thermostats.
Steam heated dryers.
On steam heated dryers there is no inlet overheating thermostat.
Error code
The following error code is related to this section:
E08
Refer to Selecta Control Service Manual, section 12 for more information.
1a
1b
A
4
A
2
A
Service
manual
A
487 03 29 41