Download Table of Contents Print this page

Removing The Clips That Hold The Front Of The Top Down; Removing The Front Panel (Front Console Models); Removing The Console (Front Console Models); Separating The Front Console Panel And The Control Mounting Panel (Front Console Models) - Electrolux 27" Electric Dryers Service Manual

Gas & electric models


Table of Contents
Removing the clips that hold the front of the top
1. Disconnect the dryer from electrical supply and
raise the top.
2. Squeeze the clip and pull it forward and lift up.
Removing the front panel:
1. Disconnect the dryer from electrical supply and
raise the top.
2. Disconnect the console harness from the main
3. Top console models, Lean the top of the panel out
and lift it off of the two clips at the bottom.
Front Panel
Removing the console: (Front console models)
1. Disconnect power from the dryer and remove the
front panel from the dryer.
2. Unplug the harness to the sensor bars and
disconnect the wires from the door switch and
the drum light.
3. Remove the two screws, one on each side, that
hold the console to the front panel and lift the
console up.
Separating the front console panel and the control
mounting panel: (Front console models)
1. Disconnect the dryer from electrical supply.
2. Remove the console from the front panel.
3. Remove the top mounting screw from the timer.

Hide quick links:


Table of Contents

Table of Contents