125986590.qxp
2007-01-29
40 electrolux removing transport safety equipment
Removing transport safety equipment
Caution! Before use all parts of the
transport packaging must be removed.
1. Open loading door
2. Pull off adhesive strips from inside
machine on top of drum.
3. Remove foil hose and polystyrene
padding from the machine.
Electrical connection
Details on mains voltage, type of
current and the fuses required should
be taken from the type plate. The type
plate is fitted near the loading aperture
(see "Machine description" section).
CAUTION: If the appliance is supplied
from a cord extension set or electrical
portable outlet device, the cord extension
set or electrical portable outlet device
must be positioned so that it is not subject to
splashing or ingress of moisture.
Important:
The plug must be accessible after the
appliance has been installed.
10:50
Page 40