0x22: Condense Pump Sensing Error
0x22
Main Board defective.
Checks to perform:
Replace the Main Board and repeat the diagnostic cycle to check for any further errors.
0x31: Conductimetric Sensor Frequency Too High
0x31
Wiring defective or Main Board defective.
0x32: Conductimetric Sensor Frequency Too Low
0x32
Wiring defective or Main Board defective.
Checks to perform:
Are the Humidity Sensor wiring terminals connected
Replace the Electronic Control Board and repeat the
diagnostic cycle to check for any further errors.
Troubleshooting Based on Error Codes
properly?
Y
E
S
WARNING
Check that all the connectors are correctly
inserted.
WARNING
Check that all the connectors are correctly
inserted.
Make the connections proper and repeat the
NO
diagnostic cycle to check for any further errors.
45
0x22
0x31
0x32