Download Print this page

Removing The Hitch Ball From The Drum; Removing The Teflon Glides; Removing The Drum Heat Shield (Electric Dryers); Removing The Hitch - Electrolux 27" Electric Dryers Service Manual

Gas & electric models
Hide thumbs

Advertisement

Removing the ball hitch from the drum:
1. Disconnect the dryer from electrical supply and
remove the drum.
2. Remove the three screws from inside the drum
holding the ball to the drum.

Removing the teflon glides:

1. Disconnect the dryer from electrical supply and
remove the drum.
2. Squeeze the tabs to release the glides.
Removing the drum heat shield: (Electric dryers)
1. Disconnect the dryer from electrical supply and
remove the drum.
2. Remove the three screws holding the shield to the
rear of the drum.

Removing the hitch:

1. Disconnect the dryer from electrical supply and
remove the drum.
2. Using a 5/16” nut driver remove the two screws
holding the hitch to the rear panel while holding the
large tinnerman clip from the rear of the dryer.
73

Advertisement

loading

  Related Manuals for Electrolux 27" Electric Dryers