Releasing The Dryer Belt; Removing The Vane From The Drum; Removing The Drum; Removing The Belt - Electrolux 27" Electric Dryers Service Manual

Releasing the dryer belt:

1. Remove the access panel.
2. Push the idler pulley to the right and slip the belt off
the motor pulley.

Removing the vane from the drum:

1. Disconnect the dryer from electrical supply.
2. Open the door, raise the top, remove the two
screws holding the vane to the drum and drop the
vane into the drum.

Removing the drum:

1. Disconnect the dryer from electrical supply.
2. Raise the top and remove the front panel.
3. Release the belt from the motor.
4. Use the belt to raise rear of the drum to release the
ball from the hitch and move the drum out the front.

Removing the belt:

1. Disconnect the dryer from electrical supply.
2. Raise the top and remove the front panel.
3. Release the belt from the motor.
4. From the front, slightly raise the front of the drum
and slide the belt off.
72