Removing The Hitch; Removing The High Limit Thermostat; Removing The Thermal Limiter (Electric Dryers); Removing The Heating Element Assembly (Electric Dryers) - Electrolux 6000 Service Manual

5.75 cu. ft. dryer gas & electric
Hide thumbs Also See for 6000:
Table of Contents

Advertisement

2. Remove the (3) screws holding the shield to the rear
of the drum.

Removing the hitch:

1. Disconnect the dryer from electrical supply and
remove the drum.
2. Using a 5/16" nut driver, remove the (2) screws
holding the hitch to the rear panel while holding the
large tinnerman clip from the rear of the dryer.
Note: Do not lose the grounding ball or the tinnerman
mounting clip from the rear of the dryer.

Removing the high limit thermostat:

1. Disconnect the dryer from electrical supply and
remove the top panel.
2. Disconnect the (2) wires and remove the (2) screws
holding thermostat to the heating element
assembly.
Removing the thermal limiter: (Electric dry-
ers)
1. Disconnect the dryer from electrical supply and
remove the top panel.
2. Disconnect the (2) wires and remove the(2) screws
holding limiter to the rear panel.
Removing the heating element assembly:
(Electric dryers)
1. Disconnect the dryer from electrical supply and
remove the drum.
2. Disconnect the (2) wires from the heating element.
75

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7000

Table of Contents