Removing The Electronic Moisture Sensor Control (Front Console Models); Removing The Top Console Skirt (Top Console Models); Removing The Console (Top Console Models) - Electrolux 27" Electric Dryers Service Manual

Removing the electronic moisture sensor control:
(Front console models)
1. Disconnect the dryer from electrical supply.
2. Lift the top, disengage the front panel and lean it
forward.
3. Unplug the harness from the electronic moisture
sensor control.
4. Lift the top bracket to release the control.
Removing the top console skirt: (Top console
models)
1. Disconnect the dryer from electrical supply.
2. Remove the back panel from the console.
3. With a small screwdriver, release the two tabs in
the center and the two tabs on each end that hold
the front shield to the end caps and console
mounting panel.
Removing the console: (Top console models)
1. Disconnect the dryer from electrical supply.
2. Remove the back panel and skirt from the console
and disconnect the components from the console.
3. The console is held to the top panel by three
slotted tabs molded into each end cap and two
screws behind the skirt. Remove the two screws,
slide the console forward and lift up.
65