Do you have a question about the UltimateCare 700 and is the answer not in the manual?
Questions and answers
Ei Ngon Phoo
April 6, 2025
Is there a “Add Clothes” function included in Electrolux UltimateCare 700 washing machine?
2 comments:
Mr. Anderson
April 6, 2025
Yes, the Electrolux UltimateCare 700 washing machine has an "Add Clothes" function.
This answer is automatically generated
Ei Ngon Phoo
April 7, 2025
@Mr. Anderson where is it? I don’t see on the machine
Daniel
April 30, 2025
We have an UltimateCare 700 dryer (which has never had a fault). We recently moved and changed the washing machine (with a faster spin cycle). However, since then, we have not needed to empty the water tank—is this an issue we should be concerned about?
1 comments:
Mr. Anderson
May 16, 2025
Yes, it is normal. The Electrolux UltimateCare 700 dryer collects water in a container before pumping it to the water tank. If the washing machine has a faster spin cycle, it extracts more water from clothes, so the dryer collects less water. This may result in little or no water in the tank after a drying cycle.
This answer is automatically generated
Linda Keeley
April 26, 2025
My electrolux does not dry. I have attempted many times since I purchased the machine, with not much success.
1 comments:
Mr. Anderson
May 14, 2025
The Electrolux 700 may not be drying properly due to one or more of the following reasons:
1. The lint filter is dirty and needs cleaning. 2. The laundry is too wet; it should be spun again in the washing machine. 3. The load is too small; increase the load or use the Time Drying program. 4. The filter is not installed correctly. 5. The room temperature is outside the optimal range (should be between 18°C and 25°C). 6. The water container may be full and needs to be emptied. 7. The laundry weight may not match the selected program duration.
This answer is automatically generated
Rebecca
April 16, 2025
Can I use the dryer without washing first
1 comments:
Mr. Anderson
April 16, 2025
Yes, the Electrolux UltimateCare 700 dryer can be used without washing clothes first. You can use the drying function only by selecting a suitable program and pressing the On/Off button to start the drying cycle.
This answer is automatically generated
Jennifer Patterson
April 15, 2025
What does Error Code E20 mean?
1 comments:
Mr. Anderson
May 14, 2025
Error Code E20 on the Electrolux 700 washing machine means that the machine is not draining water properly. This could be due to a blocked or incorrectly installed drain (water out) pipe, or an obstruction in the water outlet holes. You should also check and clean the filter.
This answer is automatically generated
Jan Stafurik
April 13, 2025
on display continuously is End
1 comments:
Mr. Anderson
April 13, 2025
"End" on the display of the Electrolux UltimateCare 700 means the drying program has finished. The clothes may still be hot, so the door should be left open to allow them to cool before removal.
This answer is automatically generated
George
April 4, 2025
How to unlock the ultimate 700 dryer
1 comments:
Mr. Anderson
April 4, 2025
To unlock the Electrolux UltimateCare 700 dryer, wait until the drying program ends and the anti-crease phase (about 10 minutes) finishes. The door lock indicator will turn off, and the display will show the end symbol. You can then open the door.
This answer is automatically generated
Suja
February 7, 2025
How do I unlock LOC
1 comments:
Mr. Anderson
May 14, 2025
To unlock the LOC feature on an Electrolux 700 front-loading washer, scroll to the control lock option and press select. The control lock icon will disappear from the LED display, and the controls will be unlocked.
This answer is automatically generated
Kerry
January 19, 2025
Can I do a cold wash
1 comments:
Mr. Anderson
February 4, 2025
Yes, the Electrolux UltimateCare 700 can perform a cold wash, as its UltraMix technology ensures detergent is fully dissolved even when using cold water.
This answer is automatically generated
Brian
August 14, 2025
Why does the drier take hours and hours to dry anyrhing
Need help?
Do you have a question about the UltimateCare 700 and is the answer not in the manual?
Questions and answers
Is there a “Add Clothes” function included in Electrolux UltimateCare 700 washing machine?
Yes, the Electrolux UltimateCare 700 washing machine has an "Add Clothes" function.
This answer is automatically generated
@Mr. Anderson where is it? I don’t see on the machine
We have an UltimateCare 700 dryer (which has never had a fault). We recently moved and changed the washing machine (with a faster spin cycle). However, since then, we have not needed to empty the water tank—is this an issue we should be concerned about?
Yes, it is normal. The Electrolux UltimateCare 700 dryer collects water in a container before pumping it to the water tank. If the washing machine has a faster spin cycle, it extracts more water from clothes, so the dryer collects less water. This may result in little or no water in the tank after a drying cycle.
This answer is automatically generated
My electrolux does not dry. I have attempted many times since I purchased the machine, with not much success.
The Electrolux 700 may not be drying properly due to one or more of the following reasons:
1. The lint filter is dirty and needs cleaning.
2. The laundry is too wet; it should be spun again in the washing machine.
3. The load is too small; increase the load or use the Time Drying program.
4. The filter is not installed correctly.
5. The room temperature is outside the optimal range (should be between 18°C and 25°C).
6. The water container may be full and needs to be emptied.
7. The laundry weight may not match the selected program duration.
This answer is automatically generated
Can I use the dryer without washing first
Yes, the Electrolux UltimateCare 700 dryer can be used without washing clothes first. You can use the drying function only by selecting a suitable program and pressing the On/Off button to start the drying cycle.
This answer is automatically generated
What does Error Code E20 mean?
Error Code E20 on the Electrolux 700 washing machine means that the machine is not draining water properly. This could be due to a blocked or incorrectly installed drain (water out) pipe, or an obstruction in the water outlet holes. You should also check and clean the filter.
This answer is automatically generated
on display continuously is End
"End" on the display of the Electrolux UltimateCare 700 means the drying program has finished. The clothes may still be hot, so the door should be left open to allow them to cool before removal.
This answer is automatically generated
How to unlock the ultimate 700 dryer
To unlock the Electrolux UltimateCare 700 dryer, wait until the drying program ends and the anti-crease phase (about 10 minutes) finishes. The door lock indicator will turn off, and the display will show the end symbol. You can then open the door.
This answer is automatically generated
How do I unlock LOC
To unlock the LOC feature on an Electrolux 700 front-loading washer, scroll to the control lock option and press select. The control lock icon will disappear from the LED display, and the controls will be unlocked.
This answer is automatically generated
Can I do a cold wash
Yes, the Electrolux UltimateCare 700 can perform a cold wash, as its UltraMix technology ensures detergent is fully dissolved even when using cold water.
This answer is automatically generated
Why does the drier take hours and hours to dry anyrhing