Service
manual
Inlet air - overheating thermostat
Function
The inlet overheating thermostat opens automatically in the event of overheating, and
shuts off the dryer. It has to be reset manually.
Resetting
Electric heated dryers, fig. 1a+1b
The overheating thermostats (2 pcs) are located behind the front shutter of the dryer
- one on the side of the heating unit 1a and one just above the heating elements 1b.
Gas heated dryers, fig. 2
The overheating thermostat is located behind the front shutter of the dryer, on the left side
of the gas heating unit.
Note! In order to reset the thermostats, open the front shutter and press the reset button
A on the thermostats.
Steam heated dryers
There is no inlet overheating thermostat on steam heated dryers.
Error code
The following error code is related to this section:
E08
See Selecta Control Service Manual for more information.
1a
1b
A
Sensors and overheating thermostats
A
2
A
A
43