Table of Contents
Advertisement
Operation and Control
Monitoring
You can monitor the live images currently being captured
by the camera, as well as the audio from the camera. You
can also perform monitoring using the layout tour function
for sequentially switching the display shown on the display
at a preset time.
This section describes the following monitoring
operations.
• "Monitoring Live Images" (page 105)
• "Monitoring Using Layout Tours" (page 106)
• "Monitoring Audio from Cameras" (page 106)
Note
To use the layout tour function, a layout tour needs to be
configured in advance. For the configuration procedure,
refer to "Configuring Layout Tours" (page 58).
Monitoring Live Images
You can monitor the images the camera is currently
capturing in any monitor frame.
1
Click the monitor frame to display the live images on
the main screen.
2
Click [LIVE] on the Monitor Control pane.
Chapter
Live images are displayed on the selected monitor
frame.
For details on each of the items, refer to "Functions
and Operating Procedure of Main Screen" (page 107).
Monitoring Images of a Different Camera
Select a camera on the Camera pane, and drag and drop it
onto the monitor frame to switch to displaying the images
of the selected camera.
You can also switch to the images of a selected camera by
clicking to select a monitor frame, and then double-
clicking a camera in the Camera pane.
5
105
Monitoring
Advertisement
Table of Contents
